Auxiliary Contacts for the BONEGA®P-E-P MCB´s

Auxiliary Contacts for the BONEGA® P-E-P MCB´s

For the miniature circuit breakers BONEGA® P-E-P, there are various optional extras available, such as e.g. undervoltage coils, ejecting coils, auxiliary contacts etc. They are installed from the left or the right side of a MCB.

The above devices extend the functions of a MCB by overvoltage or undervoltage protection, control, regulation, remote control, remote signaling of switched-off or switched-on position of a MCB, programming, measurement and other. Those combinations enable the MCB´s to be used even for the control of complicated automation processes.

Those accessories can be interconnected among each other (e.g. MCB + undervoltage release + auxiliary signaling contact etc.). In this way, it is possible to form various combinations.

The unit of the auxiliary contacts, type F-9:

The width of the auxiliary contact is ½ module = 9 mm.

It includes 1 changer-over contact signaling the MCB´s condition.

The change-over contact, which is connected at the control or signaling circuits and which indicates the MCB´s position “switched-on (ON)” or “switched-off (OFF)”.

The testing button on the front side of the auxiliary contact serves for checking the signaling circuit without MCB handling.

Installation

To be installed by fixing on the MCB´s left side without using any tools.

Overview

Overview of auxiliary contacts F-9
Order Code	Description	Packing pc./case
07-26921	Auxiliary contact ELES, Type F-9	1 pc

Export Manager: Michal Hudeček, tel: +420 605 518 724, [email protected]

Sales Department: - Mrs Adriana Jamná, fax +420 518 335 216, email : [email protected], 696 66 Sudoměřice nad Moravou 302

Circuit Protection Devices

Auxiliary Contacts for the BONEGA® P-E-P MCB´s

The unit of the auxiliary contacts, type F-9:

Installation

Overview